diff options
Diffstat (limited to 'JOURNAL.md')
| -rw-r--r-- | JOURNAL.md | 86 |
1 files changed, 84 insertions, 2 deletions
@@ -10,7 +10,7 @@ Only changed values from default are listed to save on documentation work having - Router was Reset to default config - Set password for Default SSID broadcast on built in AP - - Wireless -> Wireless -> Security Profiles -> Default : + - Wireless -> Wireless -> Security Profiles Tab -> Default : - Mode : Dynamic Keys - Auth. Types : WPA2 PSK + WPA2 EAP - WPA2 Pre-Shared Key : PasswordIWontGiveYou123 @@ -26,5 +26,87 @@ Only changed values from default are listed to save on documentation work having - Domain : 1.m145.teleco.ch - IP -> Pool -> default-dhcp - Addresses : 10.201.0.50-10.201.0.150 +- Added the three new VLANs + - Interfaces -> VLAN Tab + - New + - Comment : Virtual Hosts + - Name : vlan101 + - VLAN ID : 101 + - New + - Comment : Users + - Name : vlan102 + - VLAN ID : 102 + - New + - Comment : Guests + - Name : vlan103 + - VLAN ID : 103 + - Future repetitive tasks that use the same similar values will not be listed repeatedly +- Assigned an address to the VLAN interfaces + - IP -> Addresses + - New + - Address : 10.201.1.1/24 + - Interface : vlan101 + - Rinse and repeat for other VLANs +- Added IP Pools for DHCP on the VLANs + - IP -> Pool + - New + - Name : pool101 + - 10.201.1.50-10.201.1.150 + - Rinse and Repeat for all VLANs +- Added DHCP Networks for VLANs + - IP -> DHCP Server -> Networks Tab + - New + - Comment : dhcp101 + - Address : 10.201.1.0/24 + - Gateway : 10.201.1.1 + - DNS Servers : 10.201.1.1 + - Domain : 101.m145.teleco.ch + - Rinse and repeat +- Added DHCP Servers to Interfaces + - IP -> DHCP Server + - New + - Name : server101 + - Interface : vlan101 + - Address Pool : pool101 + - Rinse and repeat +- Add VLANs to LAN Interface list for testing (for defconf firewall rules to work) + - Interfaces -> Interface List Tab + - New + - List : LAN + - Interface : vlan101 + - Rinse and repeat for all VLANs +- Set wifi name of default VLAN to teleco-admin + - Wireless -> Wireless -> wlan1 + - SSID : teleco-admin +- Create wifi networks for teleco-user and teleco-guest + - Wireless -> Wireless + - New -> Virtual + - SSID : teleco-user + - Master Interface : wlan1 + - Repeat for guest +- Add wifi interfaces to bridge interface + - Bridge + - wlan1 + - Clone + - Interface : wlan2 + - PVID : 102 + - Repeat for wlan3 +- Test by connecting and seing if IP is assigned and router can be reached +- Change Passwords for each wifi (set one for guest temporarily too as no firewall rules exist for it yet) + - Wireless -> Wireless -> Security Profiles Tab + - default + - Clone + - Name : profile102 + - WPA2 Pre-Shared Key : PasswordIWontGiveYou124 + - Repeat for 103 +- Assign Security Profile to Actual wifis + - Wireless -> Wireless + - wlan2 + - Security Profile : profile102 + - Repeat for wlan3 -
\ No newline at end of file +- End of Lesson + - Goals next lesson : + - Wireguard Site to Site VPN working + - Firewall rules to block Guest to other Nets + - (Optional, maybe later) Captive Portal for Guest wifi
\ No newline at end of file |