diff options
| -rw-r--r-- | README.md | 211 |
1 files changed, 210 insertions, 1 deletions
@@ -2,4 +2,213 @@ TC-C-FAX : Telecos Crappy Fax -Very wip... lol
\ No newline at end of file +Very wip... lol + + +# Installing HylaFax (Make sure to have a will to live and to not loose it while installing this crap) +Done on Debian 11 because 12 is even more broken, use root user to save yourself some pain + + +1. Install build and hyla deps : +``` +apt update && apt install -y build-essential libtiff-dev libjpeg-dev \ +zlib1g-dev libpam0g-dev ghostscript gsfonts libgs-dev flex bison \ +libncurses5-dev texinfo libssl-dev libc-client-dev uuid-dev libtool \ +automake autoconf tcl8.6-dev libtiff-tools libjpeg-progs iaxmodem ghostscript gsfonts gsfonts-other gsfonts-x11 imagemagick +apt update && apt install -y ttf-mscorefonts-installer +``` +1. Download and Extract HylaFax Plus (7) sources +``` +cd /usr/local/src +wget -O hylafax-7.0.10.tar.gz "http://prdownloads.sourceforge.net/hylafax/hylafax-7.0.10.tar.gz?download" +tar -xvzf hylafax-7.0.10.tar.gz +cd hylafax-7.0.10 +``` + +1. Configure it and Build it (pray) +``` +./configure +make +make install +``` + +1. Configure IAX Modem (unless you have a physical modem) +``` nano kill youself or some shit idk figure it out ``` +paste this shit and adjust for ur stuff +``` +device /dev/ttyIAX0 +owner uucp:uucp +mode 660 +port 4577 +server AsteriskServer +refresh 300 +peername 157 +secret YourPassowrd +cidname Fax +cidnumber 157 +codec ulaw +answer yes +``` +enable iaxmodem and see if it works on ur stupid asterisk you dumbass +``` +systemctl enable --now iaxmodem +``` + +1. configure hylaficknig +``` +nano /etc/systemd/system/hylafax-faxq.service + +[Unit] +Description=HylaFAX fax queue manager +After=network.target + +[Service] +ExecStart=/usr/local/sbin/faxq +Restart=always +User=root +Group=root +Type=forking + +[Install] +WantedBy=multi-user.target + +nano /etc/systemd/system/hylafax-hfaxd.service + +[Unit] +Description=HylaFAX hfaxd server +After=network.target + +[Service] +ExecStart=/usr/local/sbin/hfaxd -i hylafax +Restart=always +User=root +Group=root +Type=forking + +[Install] +WantedBy=multi-user.target + +nano /etc/systemd/system/hylafax-faxgetty@.service + +[Unit] +Description=HylaFAX faxgetty on %I +After=network.target + +[Service] +ExecStart=/usr/local/sbin/faxgetty /dev/%I +Restart=always +User=root +Group=root +Type=simple + +[Install] +WantedBy=multi-user.target + +systemctl daemon-reload +systemctl enable --now hylafax-faxq +systemctl enable --now hylafax-hfaxd +systemctl enable --now hylafax-faxgetty@ttyIAX0 + +systemctl status hylafax-faxq +systemctl status hylafax-hfaxd +systemctl status hylafax-faxgetty@ttyIAX0 + +/usr/local/sbin/faxstat -s +``` +rape your modem +/var/spool/hylafax/etc/config.ttyIAX0 + +# $Id: iaxmodem 692 2007-11-06 18:44:20Z faxguy $ + +# +# prototype config for the IAXmodem softmodem which uses +# the spandsp soft-DSP library +# + +# +CountryCode: 41 +AreaCode: 044 +FAXNumber: +41445457486 +LongDistancePrefix: 0 +InternationalPrefix: 00 +DialStringRules: etc/dialrules +ServerTracing: 1 +SessionTracing: 0xFFF +RecvFileMode: 0600 +LogFileMode: 0600 +DeviceMode: 0666 +RingsBeforeAnswer: 1 +SpeakerVolume: off +GettyArgs: "-h %l dx_%s" +LocalIdentifier: "Teleco Group" +TagLineFont: etc/LiberationSans-25.pcf +TagLineFormat: "From Teleco Group Switzerland | %c | Page %%P of %%T"" +MaxRecvPages: 25 +# + +# +# +# Modem-related stuff: should reflect modem command interface +# and hardware connection/cabling (e.g. flow control). +# +ModemType: Class1 # use this to supply a hint + +# +# *** Caller-ID settings *** +# +# Enabling this will use the hfaxd-protocol to set Caller*ID +# +#ModemSetOriginCmd: "AT+VSID=\"%s\",\"%d\"" +# +# If "glare" during initialization becomes a problem then take +# the modem off-hook during initialization, and then place it +# back on-hook when done. +# +#ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display +#ModemReadyCmds: ATH0 +# +# However, glare is mostly avoided by iaxmodem's 5-second internal +# busy-out that occurs after hangups and resets. These two settings +# will help ensure that our reset and initialization periods don't +# go beyond that 5-second period. +# +ModemResetDelay: 0 # DTR isn't handled, anyway +ModemSoftResetCmdDelay: 0 # modem reset is complete at "OK" + +# +# You'll likely want Caller*ID display (also displays DID) enabled. +# +ModemResetCmds: AT+VCID=1 # enables CallID display +# +# If you are "missing" Caller*ID data on some calls (but not all) +# and if you do not have adequate glare protection you may want to +# not answer based on RINGs, but rather enable the CallIDAnswerLength +# for NDID, disable AT+VCID=1 and do this: +# +#RingsBeforeAnswer: 0 +#ModemRingResponse: AT+VRID=1 + +# The pty apparently does not support changing parity. +PagerTTYParity: none + +Class1AdaptRecvCmd: AT+FAR=1 +Class1TMConnectDelay: 400 # counteract quick CONNECT response + +# +# Older iaxmodem versions didn't support V.17 very well. It can be +# disabled in this fashion: +# +#Class1RMQueryCmd: "!24,48,72,96" # V.17 fast-train recv doesn't work well +#Class1TMQueryCmd: "!24,48,72,96" # V.17 fast-train recv doesn't work well + +CallIDPattern: "NMBR=" +CallIDPattern: "NAME=" +CallIDPattern: "ANID=" +CallIDPattern: "NDID=" +#CallIDAnswerLength: 4 +# Uncomment these if you really want them, but you probably don't. +#CallIDPattern: "DATE=" +#CallIDPattern: "TIME=" + + +/usr/local/sbin/faxsetup |